Home › Speed Bumps, Curbs, and Asphalt Accessories
Control traffic and define spaces with speed bump installation in Mississippi. We install asphalt speed humps, curbing, and other accessories that slow vehicles, protect landscaping, and guide drivers safely around your property.
Precision Asphalt Mississippi provides professional speed bump installation throughout Mississippi, MS, Mississippi and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (228) 400-7675 or request your free quote.
Practical Traffic Control Solutions for Mississippi, MS Properties
At Precision Asphalt Mississippi, we help property owners in Mississippi, MS solve real traffic problems with smart speed bump installation, curbing, and asphalt accessories. Our focus is not just putting asphalt in the ground. We listen to how drivers actually move on your property, when people are walking, and where near‑misses or fender benders are happening.
Most of our calls come from apartment communities on busy cut‑through streets, neighborhood HOAs worried about children playing, churches with crowded Sunday traffic, and small businesses near Highway 51 or I‑55 that see fast in‑and‑out traffic. Before we recommend any type of speed bump or curb, we walk the site, measure drive lane widths, check drainage, and note fire lane access and delivery truck routes.
Every property in Mississippi, MS is a bit different. Some lots are older with thin asphalt that cannot handle tall, aggressive speed bumps without cracking. Others have poor drainage, so a speed hump in the wrong place could create a standing water problem. By looking at these details up front, we design traffic calming and curb layouts that slow drivers without causing new headaches for your maintenance team or tenants.
How Professional Speed Bump Installation Really Works
When we handle speed bump installation, we follow a step‑by‑step process that protects your existing pavement and gives you predictable traffic calming results.
First, we confirm placement and spacing based on your goals. For example, in apartment drive lanes or school access roads, we typically space speed humps 120 to 250 feet apart depending on sight lines and target speed. On short parking lot cut‑throughs, one well placed bump near the entrance may be enough. If your property ties into a city street, we also check local guidelines so your new bumps do not conflict with municipal requirements.
Second, we mark the layout and saw cut the asphalt edges where needed. For permanent asphalt speed humps, we usually build them into the existing pavement instead of simply piling mix on top. This means milling or grinding a taper, then bonding fresh hot mix asphalt to your current surface so there is no abrupt joint that will ravel or break off.
Third, we install the asphalt using a compactable mix selected for your traffic. Light residential traffic can use a finer mix, while shopping centers and industrial sites with delivery trucks often need a heavier duty aggregate blend. We machine or hand shape the profile to a smooth parabolic or trapezoidal form, then compact in multiple passes to lock the material together.
Finally, once the asphalt has cooled and set, we apply reflective striping and, if requested, add warning signage at recommended distances so drivers have clear notice. When we use pre‑formed rubber or plastic modular speed bumps instead of asphalt, we core drill and anchor them mechanically, then seal around the edges to keep water from working under the panels and loosening them over time.
Choosing the Right Type of Speed Bump for Your Property
There is no single speed bump that fits every Mississippi, MS property. At Precision Asphalt Mississippi, we walk you through the pros and cons of each option so you can balance safety, comfort, budget, and future maintenance.
Asphalt speed humps are the most common on private roads, apartment complexes, and neighborhoods. They are built directly into your pavement, which makes them durable under local heat and humidity. Heights usually range from 2.5 to 3.5 inches, with a 12 to 14 foot travel length, so vehicles slow without scraping. These work well where you want a permanent solution and a smooth drive for residents.
Asphalt speed tables are longer and flatter and often used near crosswalks or building entrances. They can be 20 feet or more in length with a flat top that doubles as a raised crossing. In Mississippi, MS, we often recommend tables near school drop‑off zones or daycares inside larger church or community parking lots.
Modular rubber or plastic bumps are useful where you want flexibility, such as seasonal event parking, temporary construction detours, or testing a location before committing to asphalt. These come in set widths and heights, and they are bolted to the pavement. They cost less up front but may require more periodic tightening and can be less comfortable for larger vehicles.
Cost is driven by the number of bumps, total linear footage, asphalt thickness, complexity of drainage around the site, and whether we need to remove and replace damaged pavement first. For budgeting, we usually estimate per bump or per linear foot, then refine the number after we see your site and traffic pattern.
Curbs, Edging, and Containment: More Than Just a Border
Curbs and asphalt accessories are often overlooked until a car jumps a parking island or rainwater starts cutting into the edges of the lot. Proper concrete curbs, wheel stops, and edge treatments protect your pavement investment and guide both cars and water where they belong.
In Mississippi, MS, we typically install extruded or formed concrete curbs such as standard barrier curb or roll curb along drive lanes, landscape islands, and around building fronts. The curb height and style affect how easy it is for cars to mount the curb, which matters for residential streets versus delivery zones. We set and pour curbs on a compacted base, then finish them with a smooth trowel and expansion joints to handle temperature swings.
Along older lots where the asphalt edge is unraveling, we sometimes recommend asphalt edge strengthening instead of full curb work. This can include widening and feathering the edge with new hot mix, then adding a low mountable curb or simply a compacted shoulder to keep the edge from breaking under traffic.
Wheel stops (parking bumpers) are another key accessory. We install concrete, rubber, or recycled plastic wheel stops using rebar pins or anchor bolts, then align them to keep bumpers from hitting walls, fences, or sidewalks. For properties that see a lot of night traffic, we can specify wheel stops with reflective strips or paint them for higher visibility.
Other Asphalt Accessories That Improve Safety and Flow
Beyond speed bump installation and curbs, small details often make the biggest difference in how safe and usable your property feels. Precision Asphalt Mississippi sources and installs accessories that are built to handle Mississippi weather and everyday wear.
Striping and reflective markings are essential complements to speed humps and curbs. After any new asphalt work, we re‑lay out parking stalls, directional arrows, crosswalks, and stop bars, then apply high contrast traffic paint suited to hot summer sun and frequent rains. In areas with heavy truck use, we can use thicker, more durable markings.
Signage is another simple but critical accessory. We install speed limit signs, “Speed Hump Ahead” warnings, pedestrian crossing signs, and designated fire lane or no‑parking signs where needed. Signs are mounted on galvanized posts set in concrete footings so they stay upright even when bumped by carts or plows.
For drainage, we adjust or install catch basin collars and grates around new curbing and raised areas so water flows correctly. In some Mississippi, MS lots, a poorly located bump has redirected water straight toward a building entrance. When we plan your project, we check slopes with levels and string lines, then set any raised features so water still follows the intended drainage path.
Bollards and protective posts can also be integrated near storefronts, loading docks, and utility units. We core drill or excavate, set steel posts in concrete, and, if desired, cover them with maintenance‑free sleeves instead of paint that chips quickly in the sun.
Local Conditions, Common Problems, and How We Address Them
Working in Mississippi, MS, we see certain patterns over and over. Heavy summer thunderstorms, clay soils, and heat can be hard on asphalt and concrete if installation is rushed or poorly planned.
One common issue is bumps installed directly over weak or saturated subgrade. Over time, the bump settles, creating a sharp ridge on one side and a sag on the other. We avoid this by checking the base under each planned location, cutting out any soft areas, and compacting fresh aggregate before placing asphalt. On older lots, we may recommend full depth patching under the bump to provide a solid foundation.
Another frequent problem is over‑aggressive bumps that damage low vehicles and frustrate drivers. This often happens when a property uses bagged cold patch or stacks pre‑made bump sections without considering height. Our crews use consistent templates, gauges, and finish rakes to match the profile we agree on with you, then test drive the installation before we finalize striping.
Drainage is also critical. In some Mississippi properties, surface water already tries to cross drive lanes at low points. Placing a bump there can create a dam and increase standing water that leads to potholes and algae. We study the water flow and, when needed, adjust elevations slightly, add small scuppers or drainage notches in curbs, or recommend a different location to keep water moving.
Lastly, we help you plan around emergency access and service vehicles. We consider the turning radius and ground clearance of fire trucks, ambulances, delivery trucks, and garbage trucks. For fire lanes, we often use slightly lower, longer humps or tables that calm everyday traffic but remain passable for emergency response without slowing them too much.
What to Expect When You Hire Precision Asphalt Mississippi
From the first call, our goal is to make your speed bump, curb, and accessory project straightforward and predictable. We start with a site visit in Mississippi, MS, where we listen to your concerns, review any accident or complaint history, and walk the property with you. We then outline options, including different types of speed bumps or curbs, and give you clear pricing tied to specific locations and quantities.
Before work begins, we help you plan tenant or customer notices, temporary closures, and alternate parking if needed. For active businesses, we often schedule installations in phases or during off‑peak hours, such as early mornings or weekends, to minimize disruption.
On the day of installation, our crew sets up cones and barricades, completes any asphalt repairs that must come first, and then builds the bumps, curbs, or installs accessories according to the agreed layout. We keep the work areas clean and safe, and we stay on site until you have walked the finished product and are comfortable with the layout and drive feel.
After the work is complete, we provide guidance on cure times, when vehicles can return, and how to maintain markings and accessories. For example, fresh asphalt speed humps can typically handle light traffic the same day but benefit from avoiding sharp turning or heavy braking on top of them during the first 24 hours. We also discuss long term care, such as repainting interval for stripes and prompt repair of any damaged wheel stops or signs.
When you choose Precision Asphalt Mississippi, you get a local partner who understands the specific traffic patterns, weather, and property concerns around Mississippi, MS and who designs speed bump installation, curbing, and asphalt accessories that work with your site instead of against it.
